How To Program Caddx Nx 8 Installation

• How To Program Caddx Nx 8 Installation Instructions

Caddx NX-8 Program v1 Download Callback. 98 # = calls downloader(User Code after may be required)Download Answer.

99 # = picks phone ringing(User Code after may be required)Enter Program1. Press.

+ 8(STAY/CHIME/EXIT/BYPASS/CANCEL lights will flash)2. 9713 (default)(STAY/CHIME/EXIT/BYPASS/CANCEL lights flash, SERVICE ON)3. 0 + #(STAY CHIME EXIT BYPASS CANCEL, SERVICE, ARMED turns ON)(If incorrect Install code entered STAY/CHIME/EXIT/BYPASS/CANCEL will continue flashing)Move to LocationLocation + #Enter DataEnter data +. which saves and moves to next digit within location, # exits at any timeExample: To change Receiver Phone 11.

How To Program Caddx Nx 8 Installation Instructions

Press 0 + #(Moves to location 0)2. Enter 15 +.(Selects Touch Tone dialing)3. Enter 1. 8. 0. 0. etc(End Phone Number with 14 +.)4.

Update, June 2017: The Caddx NetworX series is evidently being discontinued. ThoughI haven’t seen any official announcement from GE/Interlogix, I can findno listings for Caddx panels at 2 of the 3 suppliers I regularly visitonline.

The only supplier I saw still listing Caddx equipment has manyfewer items, compared to years past. If you’re considering installing a new Caddx NetworX system, scroll down to see my ' section, at the bottom of this page.

If you’re looking for information on Caddx NetworX systems in general, read onAll three General Electric products Networx systems can handle acombination of hardwired and wireless zones, so they can easily beinstalled in new or existing construction. This installationflexibility, along with low cost, make a Caddx alarm panel a good choicefor a DIY security system.Caddx wireless transmitters are the standard NX-seriessensors used by many other GE systems. Wireless sensors are availablefor doors and windows, motions, glassbreaks, smoke detectors, etc.Wireless keypads and keyfobs can also be added to allow easy arming,disarming, and other functions.Need more than 48 zones? Check out the.If you want a mostly wireless system, see these pages:GE Security Caddx NX-4. 4-Hardwired zones on-board, expandable to 8-zones. 4-Wire smoke loop.

8-User codesThe NetworX-4 or NX-4 is one of the most basic of GE homesecurity systems available. It’s a hybrid panel that features 4programmable zones, expandable to a total of 8. Unlike the NX-6 andNX-8, the NX-4 doesn’t have any programmable outputs.The Caddx NX-4 is often sold as a package, with everythingneeded to build a complete basic system. Its small size makes it a goodfit for an apartment, condo, or townhouse-size home.If you’re choosing a system for a not-so-small-to-medium size home, you may want to gowith the NX-6 or even the NX-8 (below), rather than limit yourself withthe NX-4.

The slight additional cost for the larger Caddx alarms isoffset with much more flexibility, if you ever decide to expand thesystem in the future. GE Security Caddx NX-6. 6 Hardwired zones on-board, expandable to16-zone maximum capacity (wireless)/ 12 zones hardwired. 4 Programmable outputs.

2-Wire and 4-wire smoke detector loop. 40 User codesThe GE Caddx NX-6 builds upward from the NX-4, addingincreased numbers of zones and user codes. It also offers a 2-wire smokedetector loop, which is much easier to work with for do-it-yourselfhome alarm installers.

The increased zone capacity makes the Caddx NX-6 agood choice for a medium or slightly larger size home, depending on thenumber of doors and windows you need to protect. GE Security Caddx NX-8. 8 on-board zones, expandable to 48 zones maximum - hardwired and/or wireless.

2-wire and 4-wire smoke detector loops. 4 programmable outputs.

99 user codesThe largest GE Caddx panel, the NX-8 gives you plenty of zone capacityfor a large house (along with more codes than you’ll likely ever need!)It also features both 2- and 4-wire smoke detector loops, making theaddition of fire protection easier.Like the NX-6, this system offers 4 programmable outputs. Thesecan be used to activate a relay or optional device in response to analarm or other system event.Programming GE Caddx SystemsThe Caddx Networx panels can be programmed remotely, using Caddx remote software, or on-site using a keypad.As with most keypad-programmable security panels, the Caddxalarm systems are easier to work with if you have an LCD display keypad.Although a standard LED keypad will work, it can be confusing trying tonavigate the menus using only LED’s for feedback.If you’re on a tight budget and/or are installing the system in asmaller home, an LED keypad will be fine. If you’re planning a systemfor a larger house with many points of protection to program, you’ll bemuch happier with an LCD unit like the NX-148E (hardwired) or theNX-148E-RF (wireless.)You can find links to GE Caddx NX-8 manuals on my page. New to Caddx NetworX?As I mentioned earlier, it appears that the GE Interlogix Caddx NetworXline of alarm panels is being discontinued.

There are still listingsfor NX-4, NX-6, and NX-8 main panels from a few suppliers that Iregularly check, others list them as “No Longer Available” or“Discontinued”.Various accessories like keypads, zone expanders, relay modules, etc. Are currently listed as available.What does this mean to you? It depends on your situation: If you’re shopping for a brand-new system, your choice is obvious: Choose anything BUT an NX-4, NX-6, or NX-8 system.These older panels offer no features that you can’t get on most current systems, and lack most of the latest options people are buying.

Also, if anything were to break on your Caddx system, you can’t count on being able to get replacement parts.If you have an existing NX-4, -6, or-8 GE Caddx system in need of replacement parts?You have to decide whether to spend the money to fix it, or simply replace the whole system. To help you decide, here is my opinion:. If the system was in good working order previously, has all the features you need, and the keypads are fully functional and undamaged, then I would lean towards fixing the system. Chances are good that you’ll get at least another several years or more of use from the system. All trademarks are the property of their respective owners.This site is supported through affiliate marketing.

A small commission is earned from purchases which funds site research & upkeep. Lee Russell is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com, amazonsupply.com, or myhabit.com. Copyright © 2011-2019 Home-Security-Systems-Answers.com.